The DMC-A300L industrial dehumidifier is designed for factory and warehouse humidity control applications. It is suitable for production areas, workshops, storage rooms, underground facilities, equipment rooms, and commercial buildings where stable humidity is important.
With a 300L/day dehumidification capacity, this model provides stronger moisture removal for large indoor areas. It is equipped with compressor protection, automatic defrost, power-off memory, phase-sequence protection, and a coil temperature sensor, making it suitable for more demanding industrial operating environments.
The Linx plastic axial inline duct fan is designed for air supply and exhaust ventilation in residential, commercial, and light-duty ventilation systems. It can be used in bathrooms, kitchens, storage rooms, laundry rooms, offices, small shops, equipment rooms, and duct ventilation systems.
Yes. The Linx series can be used for both air supply and exhaust applications. It helps bring fresh air into a space or remove stale air, moisture, odors, and indoor pollutants through a duct ventilation system.
The Linx series is available in multiple duct sizes, including Linx 100, Linx 125, Linx 150, Linx 160, Linx 200, Linx 250, and Linx 315. Different sizes are suitable for different airflow requirements and duct system designs.
The right fan size depends on the duct diameter, required airflow, room size, duct length, and ventilation purpose. Smaller models such as Linx 100 and Linx 125 are commonly used for small rooms and residential ventilation, while larger models such as Linx 200, Linx 250, and Linx 315 are better suited for higher airflow requirements.
The Linx series supports multiple control options, including single-speed, dual-speed, and remote speed control. Control options may vary by model and project requirements. For specific configurations, please contact the Cycair sales team.
